 |
TLaser 200 Series
The TLAser 200 series gauge can measure your product's diameter and position in two planes at right angles to each other -- making it possible to check ovality and detect flaws continually using only one compact micrometer. LaserLinc's system design also makes it easy to measure multiple strands simultaneously with just one gauge.
|
 |
TLaser 2120
You can readily inspect and reduce the product variations of large pipe, hose, and tubes up to 120mm (4.72 inches) in diameter with LaserLinc's TLAser2120 Dual-Axis Micrometer.
|
 |
TLaser Series: 122 and 122s
Versatility is an extremely important feature of the LaserLinc single-axis TLAser122 Micrometer. This model employs an advanced prism-based scanning technology. It is designed to be extremely repeatable, accurate, compact and affordable. It's optimized for use with the TLAser400 Interface Card and LaserLinc software.
The TLAser122 Micrometer is a great choice for multi-strand measurement of products such as enameled wire and fiber ribbon. The LaserLinc Multi-Strand option offers 100% inspection of a virtually unlimited number of strands using one or more micrometers.
|
 |
Triton Series: 312 and 330
LaserLinc's Three-Axis Triton Micrometers provide near-perfect measurements of ovality/eccentricity of elliptically shaped products, regardless of the angle at which they’re measured—thereby minimizing material costs and assuring the highest quality products and return on investment. These three-axis micrometers are also approximately three times better than two-axis micrometers at detecting flaws. Measuring the ovality—also called eccentricity—of nearly round and elliptically shaped products with a dual-axis micrometer is prone to error (see graph below). LaserLinc’s three-axis scanners eliminate these errors because they accurately measure your product regardless of the angle at which it is oriented.
|
