These Maguire feeders are designed expressly for installation on small injection molding machines. The motor is positioned on one side and the hopper on the other to evenly balance the weight of the feeder over the feed throat of the machine.

Remote Controls

A remote control configuration further reduces the weight of the equipment that is bolted to the throat.

Removable Hopper

Similar to the MCF feeder, the "Little Guy" hopper, auger, and auger tube make up a complete assembly easily removed without tools for ease of color change. Not a single pellet is left behind to contaminate your next color.

See-Through Baffle Chamber

Stainless steel is used for all color contact surfaces including the hopper and flow chamber baffles. Removable acrylic windows on the flow baffle chamber permit a clear view of the resin and color flow and allow easy access to the chamber.

Model	Auger Size	Max RPMs	Continuous Output lb/hr
			Min	Max
MLG-4-18	1/2" (12mm)	30	.05 (0.02 kg)	4 (1.8 kg)
MLG-4-34	1/2" (12mm)	55	.1 (0.05 kg)	7 (3.2 kg)