|
Accessories: Gas Assist Injection Nozzle
BAUER COMPRESSORS, INC. introduces the latest advance in gas assist shut-off nozzle design. The compact, patented Universal Self Actuating Nozzle (USN) has an overall length of only 5 1/2 inches and can be used on any molding machine 20 tons and larger. The USN (BAUER Model #ORF-0017) comes with a standard 1 3/4 inch - 8 thread size and can be used with any thermoplastic material. It requires no additional hydraulics or pneumatics and contains no seals to wear. The USN can be disassembled in minutes, allowing for quick and easy maintenance. Heater brands and check valves are available. |
|
Accessories: Gas Assist Injections Pins
BAUER COMPRESSORS, INC. supplies state of the art Patented Gas Assist Injector Pins (INJ). BAUER Gas Pins are offered in various sizes, materials and designs to fit your specific needs. All BAUER Gas Pins are tool face mounted for easy maintenance and minimal downtime. BAUER Technical Specialists can provide assistance in gas pin selection and location in the tool. Our experienced plastic professionals have the expertise required for a success full installation of the gas assist process. |
|
Accessories: Vent Control Valve
BAUER COMPRESSORS, INC. introduces the latest advance in high pressure regulator protection. The compact, patent pending BAUER Vent Control ValveŽ (VCV) has an overall length of only 4 1/2 inches and can be used with any gas assist control unit (standard with the BAUER NCU.V2). The VCV (BAUER Model #VCV-0002) acts as a direct flow-through device giving the NCU full control of the profile during injection, but during the venting phase an internal check valve diverts volatiles and contaminants to atmosphere, reducing or eliminating the periodic cleaning and maintenance of the high pressure regulators. |
|
GA Compressor Series
BAUER has manufacturing high pressure compressor systems for over 50 years, earning the reputation as an industry leader in quality, innovation and reliability. BAUER Nitrogen Compressors are designed to supply the high pressure nitrogen required for gas assist injection molding. |
|
Literature: Bauer Gas Assist Injection Molding Manual
Gas Assist Injection Molding allows the reader to evaluate the process benefits and describes implementation for gas assist molding. Empirical data from actual case studies is included along with a troubleshooting guide for the gas assist molder. |
|
Nitrogen Control Unit (NCU)
The BAUER Nitrogen Control Unit can adapt any injection molding machine, regardless of make of model, for use with the gas assist process. |
|
Stationary Nitrogen Generator
The BAUER SNG Series II Nitrogen Generators is a self-contained, fully integrated, modular system that eliminates the hazards involved with the handling of high pressure cylinders as well as the burden of merchant supplied nitrogen gas. These systems incorporate a modular design installed on a single skid to allow for easy customization of the total system to meet specific design applications. |
