Description
This specialty conveyor uses extra-deep scoop cleats and a cleat trap to lift small to medium-sized parts at angles up to 75°. It is ideal for conveying parts to secondary equipment such as cap lining or assembly machines.
Combined Lengths: 7' to 16' in 1ft. increments
Available Belt Widths: 12", 18", 24"
Specifications:
- Direct Drive configuration with 1/3 hp AC motor (110V input with 230/60/3 output to motor)
- 4-40 FPM variable speed drive
- Sealed gear reducer
- 12-gauge steel construction
- Adjustable angle (65° to 75°) stand with painted black steel legs and locking castors included
- Double V-guided, FDA-approved, white Nitrile belt with 2.5" high bonded flexible cleats on 9" centers
- 4" high side rails, lapped over conveyor belt
- Stainless steel accumulation hopper, discharge shroud, and chute included
- 15' power cord included. Pre-wired ready to run (except polyphase systems which require some customer wiring)
- Control wiring contained in liquid-tight conduit and connectors
- Units ship fully assembled
Standard Hopper Sizes:
- 12" belt width: 7-1/2 cu. ft.
- 18" belt width: 8-1/2 cu. ft.
- 24" belt width: 9-1/4 cu. ft.
BW = Belt width.
W dimension is belt width + 14.5" on 10' and shorter conveyors.
W dimension is belt width + 48" on 11' and longer conveyors.
L dimension is 42" minimum - 54" maximum. for 7' through 10' conveyors.
L dimension is 61" minimum for 11' through 16' conveyors.
